115 lines
5.8 KiB
Markdown
115 lines
5.8 KiB
Markdown
# CRDS Scan Analyzer
|
||
|
||
<img src="screenshots/fit_demo.png" width=600/>
|
||
|
||
## Basics
|
||
|
||
- Designed for usage with **Mid-IR laser comb** scan output (time scale, not frequency)
|
||
|
||
- Expected data column format: `<time>, <signal voltage in>, <piezo crystal voltage out (optional)>`
|
||
|
||
## Building (Python 3.8+)
|
||
|
||
1. `pip3 <or python3 -m pip> install -r requirements.txt`
|
||
|
||
2. `build.cmd -compileUI -build`
|
||
|
||
3. Find build output in `/dist/`
|
||
|
||
## General Usage
|
||
|
||
1. Import data (CSV - default Zurich output format)
|
||
|
||
- Comment - %
|
||
- Delimiter - ;
|
||
|
||
2. Cut out & overlay peak groups using either piezo-voltage-threshold or group-spacing algorithm
|
||
|
||
3. Set peak isolation parameters + guesses for ringdown function coefficients
|
||
|
||
4. Admire glorious tau distributions for each comb tooth - **Note that the timescale used during correlation, adding & fitting (including the initial guess for tau) is in SENSOR TICKS. The resulting tau values are converted back to the original timescale at the end.**
|
||
|
||
## Instructions
|
||
|
||
##### GENERAL CONFIG
|
||
|
||
| Input | Purpose |
|
||
| -------- | ------------------------------------------------------ |
|
||
| Timestep | Time interval of each sensor tick (e.g. 0.0000000178s) |
|
||
|
||
##### GROUPING CONFIG (SpacedGroups)
|
||
|
||
The SpacedGroups algorithm uses the length of each group (looking *length* in each direction from the first peak in the group) to determine which peaks fit into which group.
|
||
|
||
| Input | Purpose |
|
||
| ------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------- |
|
||
| Group length | How long in time the peak group is (e.g. 0.0006s) |
|
||
| Min peak height | The lowest acceptable height for a peak to be detected |
|
||
| Min peak prominence | Prominence of detectable peaks - read about prominence [here](https://en.wikipedia.org/wiki/Topographic_prominence). Is finnicky, might have to play around a bit |
|
||
| Moving average size | Peak detection uses a moving average (of which this is the denominator) to smooth out the data **(FOR GROUPING ONLY)**. |
|
||
|
||
**Notes**
|
||
|
||
- You can custom start and end cutoffs for grouping in case there's only part of a group at the beginning or end
|
||
|
||
- You can choose to exclude mirrored groups (which occur every other group). Or don't. Depends on how you configured the lab setup.
|
||
|
||
##### GROUPING CONFIG (VThreshold)
|
||
|
||
This algorithm *should* look at the min and max voltages provided to separate out groups. It's not implemented yet, though.
|
||
|
||
##### PEAK ISOLATION CONFIG
|
||
|
||
This is where the overlayed peak groups are added together, and the added peaks are cut out.
|
||
|
||
**Note that the timescale here is in ticks, NOT seconds/milliseconds/etc.**
|
||
|
||
| Input | Purpose |
|
||
| ----------------------- | ------------------------------------------------------------------------------------------------------------------- |
|
||
| Added peak length | The length of the (added) peaks that you want cut out. Centers around tip of peak. |
|
||
| Min added peak height | The lowest acceptable height for a peak to be detected |
|
||
| Added peak prominence | Prominence of detectable peaks - read about prominence [here](https://en.wikipedia.org/wiki/Topographic_prominence) |
|
||
| Shift over cut-out zone | How many ticks to shift the center of the cut-out zone from the peak tip |
|
||
|
||
##### INITIAL FIT CONFIG
|
||
|
||
`y = y0 + a*e^(-t/tau)`
|
||
|
||
| Input | Purpose |
|
||
| -------------------- |:------------------------------------------------------- |
|
||
| *a* value | Variable in equation |
|
||
| *tau* value | Variable in equation |
|
||
| *y0* value | Variable in equation |
|
||
| Shift over fit start | How many ticks to shift over the start of the curve fit |
|
||
|
||
## Feature Set
|
||
|
||
| Feature | Status |
|
||
| ---------------------------------------------- |:------:|
|
||
| Import CSV Data | ✅ |
|
||
| Group peaks (peak spacing) | ✅ |
|
||
| Group peaks (piezo crystal voltage thresholds) | ❌ |
|
||
| Custom start & end times for peak grouping | ✅ |
|
||
| Correlate grouped peaks | ✅ |
|
||
| Add & cut out overlayed peaks | ✅ |
|
||
| Batch fit peaks | ✅ |
|
||
| Display average tau data | ✅ |
|
||
| Export data as CSV | ✅ |
|
||
| Residuals on fits | ✅ |
|
||
| Standard deviations | ✅ |
|
||
| Persistent data storage | ❌ |
|
||
|
||
## Ideas if anyone has the time to add anything
|
||
|
||
- Speedier iteration & number crunching ([Numba](https://numba.pydata.org/))
|
||
|
||
- Support for different file formats (e.g. [LabView]([npTDMS · PyPI](https://pypi.org/project/npTDMS/)))
|
||
|
||
## Screenshots
|
||
|
||
<img src="screenshots/time_constant_demo.png" width=600/>
|
||
|
||
<img src="screenshots/correlation_demo.png" width=600/>
|
||
|
||
<img src="screenshots/voltage_demo.png" width=600/>
|