diff --git a/matlab-version/ratio-pyrometry.m b/matlab-version/ratio-pyrometry.m
new file mode 100644
index 0000000..0db90eb
--- /dev/null
+++ b/matlab-version/ratio-pyrometry.m
@@ -0,0 +1,53 @@
+B = imread("/Users/michael/Projects/firelab-general/examples/01-0001-cropped.png");
+
+nrows = height(B);
+ncolumns = width(B);
+
+rdc = 7.7; % This, and the next 2 terms, are dark current values.
+gdc = 11.5; % They’re representative for a single camera orientation,
+bdc = 4.4; % but they’re negligible in general.
+GSdc = (rdc+gdc+bdc)/3;
+
+iso = 64;
+t = 0.5;
+f = 2.4;
+
+rawred = double(B(:,:,1));
+rawgreen = double(B(:,:,2));
+rawblue = double(B(:,:,3));
+rawblue(rawblue > 65534) = 0;
+rawGS = double(rgb2gray(B));
+
+normred = ((rawred-rdc)*(f^2))/(iso*t);
+normgreen = ((rawgreen-gdc)*(f^2))/(iso*t);
+normblue = ((rawblue-bdc)*(f^2))/(iso*t);
+
+GR = normgreen./normred; % Green-to-Red normalized pixel ratio
+GR2 = log10(GR); % Log-base-10 of above ratio
+GR2(imag(GR2) > 0) = 0; % Removes any imaginary entries
+logGR = GR2; % Redefinition for calculations
+
+%% Application of ratio pyrometry curve fit
+RT = (362.73.*(logGR.^3) + 2186.7.*(logGR.^2) + 4466.5.*(logGR) + 3753.5); % New Camera Ratio Temp
+
+%% Removal of 600-1200 range (Ratio)
+RT(RT < 600 | RT > 1200) = 0; % BB Calibration Temperature range
+
+%% 50% rule (Ratio)
+RT2 = RT; % This section and below apply a noise reduction algorithm
+% - if 50% of pixels around each pixel are 0, set that pixel to 0 as well
+for i = 4:(nrows-4)
+    for j = 4:(ncolumns-4)
+        if nnz(RT(i-3:i+3,j-3:j+3)) < 25
+            RT2(i,j) = 0;
+        else
+            RT2(i,j) = RT(i,j);
+        end
+    end 
+end
+
+%% MATLAB display
+RT3=RT2; % Left in b/c some images need to be flipped for proper
+% display - to do this, the command would instead be "RT3 = flip(RT2)
+RatioAverageTemp = mean(nonzeros(RT3)); % Average surface temperature
+Pixel = nnz(RT3); % Temp pixel count, to contextualize